Home / Equipment / Log grapple / Grapple saw
GRAPPLE SAW
for handling and sectioning logs of all sizes
The PTH oscillating grapple saw is designed for sectioning and handling logs, small or large diameter, on an excavator.
Available, for excavator installation, in 2 models to cut from 450 to 900 mm diameter.
The grapple saw consists of: an oscillating rotator, to allow 360° movement, an extremely robust, closed-tip grapple with a maximum opening of 2 metres, and a chainsaw kit, to cut up to 900 mm in diameter.
TECHNICAL FEATURES
The structure of the grapple, made of high-strength, wear-resistant steel, features
reinforced profiles and are actuated by a double cylinder.
The hydraulic system is characterised by:
• a single-acting line for the saw unit;
• a double-acting line for the grapple;
• a double-acting line for the oscillating rotor.
Safety is ensured by the block and relief valve, which is integrated on all grapple models.
Our ‘turnkey’ kit is available on all models, consisting of:
• Mounting bracket, specific to your operating vehicle;
• Dedicated hose kit.
This way you can quickly install your equipment and start working, without worrying about the rest.
The PTH oscillating grapple saw is designed for sectioning and handling logs, small or large diameter, on an excavator.
Available, for excavator installation, in 2 models to cut from 450 to 900 mm diameter.
The grapple saw consists of: an oscillating rotator, to allow 360° movement, an extremely robust, closed-tip grapple with a maximum opening of 2 metres, and a chainsaw kit, to cut up to 900 mm in diameter.
TECHNICAL FEATURES
The structure of the grapple, made of high-strength, wear-resistant steel, features reinforced profiles and are actuated by a double cylinder.
The hydraulic system is characterised by:
• a single-acting line for the saw unit;
• a double-acting line for the grapple;
• a double-acting line for the oscillating rotor.
Safety is ensured by the block and relief valve, which is integrated on all grapple models.
Our ‘turnkey’ kit is available on all models, consisting of:
• Mounting bracket, specific to your operating vehicle;
• Dedicated hose kit.
This way you can quickly install your equipment and start working, without worrying about the rest.
SEE TECHNICAL SPECIFICATIONS
Carico massimo
Maximum load
Charge maximale
Apertura massima
Maximum opening
Overture maximale
Catena
Saw chain
Chaîne de tronçonneuse
PTH450
4 – 9 tons
280 kg
617 lbs
400 mm
16”
900 mm
35”
1435 mm
56.6”
pinza 200 bar
grapple 2900 psi
sega 250 bar
saw 3627 psi
rotore 200 bar
rotor 2900 psi
pinza 40 l/min
grapple 10 gpm
sega 50 l/min
saw 13 gpm
rotore 20 l/min
rotor 5 gpm
.404″
1,6mm
550 mm
21,6”
Carico assiale dinamico massimo 2500 kg
Max. axial load dynamic 5511lbs
Motore a pistoni 6 cc
Piston motor 6 cc
PTH900
12 – 18 tons
590 kg
1300 lbs
900 mm
35”
5000 kg
11025 lbs
2070 mm
81”
pinza 180 – 230 bar
grapple 2610 – 3336 psi
sega 250 bar
saw 3627 psi
rotore 250 bar
rotor 3627 psi
pinza 70 l/min
grapple 18 gpm
sega 130 – 160 l/min
saw 18 gpm
rotore 40 l/min
rotor 10 gpm
3/4″
1000 mm
39″
Carico assiale dinamico massimo +80 kN
Max. axial load dynamic +17988 lbf
Motore a pistoni 30 cc
Piston motor 30 cc
Why GRAPPLE SAW PTH
To section and handle logs with one piece of equipment
Chainsaw kit for different cutting diameters
Grapple opening up to 2m
WATCH GRAPPLE SAW PTH AT WORK
DISCOVER LOG GRAPPLES
GRAPPLE PFIMX
GRAPPLE HD
