Home / Equipment / Mechanical pruning / Pruning cutting bar
PRUNING CUTTING BAR
for pruning hedges and branches with precision, up to 100 mm in diameter
The pruning cutting bar TRI is available in 3 different models, from 160 to 220 cm working length, and can be installed on excavators or backhoe loaders.
The pruning cutting bar is made entirely of high-strength, wear-resistant steel, as are the cutting blades.
The cutting system is made up of a series of comb-shaped blades, which run down shearing branches and shrubs. The drive is provided by a powerful thrust piston accompanied by a ¾” flow control valve.
TECHNICAL FEATURES
Precise pruning is also facilitated by the mechanical adjustment of the cutting angle.
The hydraulic system requires a hydraulic hammer line without the need for drainage.
All safety guards are CE-compliant.
Our ‘turnkey’ kit is available on all models, consisting of:
• Mounting bracket, specific to your operating vehicle;
• Dedicated hose kit.
This way you can quickly install your equipment and start working, without worrying about the rest.
The pruning cutting bar TRI is available in 3 different models, from 160 to 220 cm working length, and can be installed on excavators or backhoe loaders.
The pruning cutting bar is made entirely of high-strength, wear-resistant steel, as are the cutting blades.
The cutting system is made up of a series of comb-shaped blades, which run down shearing branches and shrubs. The drive is provided by a powerful thrust piston accompanied by a ¾” flow control valve.
TECHNICAL FEATURES
Precise pruning is also facilitated by the mechanical adjustment of the cutting angle.
The hydraulic system requires a hydraulic hammer line without the need for drainage.
All safety guards are CE-compliant.
Our ‘turnkey’ kit is available on all models, consisting of:
• Mounting bracket, specific to your operating vehicle;
• Dedicated hose kit.
This way you can quickly install your equipment and start working, without worrying about the rest.
SEE TECHNICAL SPECIFICATIONS
Lunghezza barra
Width
Longueur de barre
Giri
Rev
Tours
TRI1600
4 – 10 tons
160 cm
63”
100 mm
4”
250 bar
3700 psi
60 l/min
16 gpm
160 cm
63”
85 min
TRI1900
4 – 10 tons
190 cm
75”
100 mm
4”
250 bar
3700 psi
60 l/min
16 gpm
190 cm
75”
85 min
TRI2200
4 – 10 tons
220 cm
87”
100 mm
4”
250 bar
3700 psi
60 l/min
16 gpm
220 cm
87”
85 min
Why PRUNING CUTTING BAR TRI
Cuts up to 10 cm in diameter
Robust construction with high-strength wear-resistant steel sheets
Bar length up to 220 cm
DISCOVER PRUNING EQUIPMENT
DISC HEDGE TRIMMER
PRUNING CUTTING BAR
CUTTER BAR
HYDRAULIC HEDGE TRIMMER
