Prodotti Archive - OMEF GROUP

TREE SHEAR FOR EXCAVATOR

admin — Tue, 17 Jun 2025 22:40:22 +0000

Home / Equipment / Tree cutting / Tree shear for excavator

TREE SHEAR FOR EXCAVATOR

BIG INCH Series

The OMEF tree shear is the equipment designed for cutting trees in both urban and forestry contexts.

The range of shears consists of 6 models and is designed to meet different cutting and installation requirements on operating machines such as excavators, tractors, backhoe loaders or skid steer loaders.

TECHNICAL FEATURES
The machine features a one double-acting hydraulic line, which, thanks to its high-performance cylinder, allows cutting and holding the tree in a single action, greatly simplifying maintenance and increasing durability.

The strength of the structure is guaranteed by the all-steel body with high durability under heavy duty conditions.

Cutting is ensured by the patented profile blade, welded to the structure, capable of penetrating the fibres of the most resistant tree varieties: such as olive, oak and eucalyptus.

A version of the tree shear with a bolted blade is also available on request, for those who need to use it only as a handling grapple.

Each equipment is also supplied with a mounting bracket and hose kit on request, for ready installation.

The OMEF tree shear is the equipment designed for cutting trees in both urban and forestry contexts.

The easiest and most durable solution for cutting: trees, plants and hedges of any size, with little maintenance.

TECHNICAL FEATURES

CONE SPLITTER

admin — Tue, 17 Jun 2025 21:26:51 +0000

Home / Equipment / Wood processing / Cone splitter

CONE SPLITTER

for splitting logs up to 2 m in diameter

The SPV series cone splitter is designed for splitting logs of any length and type of wood up to 2 metres in diameter.
Available in 5 different models for different splitting diameters and can be installed on an excavator, skid steer loader, backhoe loader, telescopic handler or tractor.

Its structure, with a conical screw and 2 or 4 principle bit, allows it to penetrate even the most compact wood fibres to split them.
Once screwed into the wood – the bit – also allows the log to be moved quickly for subsequent loading, chipping and shredding operations.

TECHNICAL FEATURES
The hydraulic system requires a double-acting line and a drainage pipe.
In addition to the conical splitting bit, the machine can be equipped with:
– stump grinder for shredding logs emerging from the ground, or,
– drill bit for drilling holes in the ground.

Our ‘turnkey’ kit is available on all models, consisting of:
• Mounting bracket, specific to your operating vehicle;
• Dedicated hose kit.
This way you can quickly install your equipment and start working, without worrying about the rest.

The SPV series screw cone splitter is designed for splitting logs of any length and type of wood up to 2 metres in diameter.
Available in 5 different models for different splitting diameters and can be installed on an excavator, skid steer loader, backhoe loader, telescopic handler or tractor.

Its structure, with a conical screw and 2- or 4-principle bit, allows it to penetrate even the most compact wood fibres to split them.
Once screwed into the wood – the bit – also allows the log to be moved quickly for subsequent loading, chipping and shredding operations.

TECHNICAL FEATURES

GRAPPLE SAW

admin — Tue, 17 Jun 2025 14:05:42 +0000

Home / Equipment / Tree cutting / Grapple saw

GRAPPLE SAW

GS Series

The OMEF grapple saw is forestry equipment designed for the felling, pruning and safe handling of trees in both urban and forestry contexts.

After closing the grapple around the log, the cut is made by hydraulic chainsaw, allowing subsequent handling.

The strength of the structure is guaranteed by the all-steel body with high durability under heavy duty conditions.

TECHNICAL FEATURES
The machine features two hydraulic lines: one single-acting line controls the chainsaw bar, the other double-acting line- switchable by means of a solenoid valve – controls the opening and closing of the grapple or the 360° rotation of the slewing ring.

The chainsaw bar is equipped with automatic lubrication, while safety is ensured by the double grapple and the lock valve on the hydraulic cylinder.

All of our equipment is supplied with a mounting bracket and hose kit, upon request, for ready installation.

The most complete choice for cutting, pruning and handling trees of any variety and trunk diameter, on excavators.

The OMEF grapple saw is forestry equipment designed for the felling, pruning and safe handling of trees in both urban and forestry contexts.

After closing the grapple around the log, the cut is made by hydraulic chainsaw, allowing subsequent handling.

The strength of the structure is guaranteed by the all-steel body with high durability under heavy duty conditions.

TECHNICAL FEATURES

LOG GRAPPLE

admin — Tue, 17 Jun 2025 08:31:07 +0000

Home / Equipment / Log grapple / Log grapple PFIMX

LOG GRAPPLE PFIMX

with light structure, open or closed tip

Wood grapple PFIMX is characterised by a lightweight construction for handling wood logs, small or large in diameter, on an excavator, backhoe loader, telescopic handler or tractor.

The equipment is available with two different types of tips:
• OPEN: for greater versatility and manoeuvrability on varied and uneven timber or in tight, confined spaces where gripping is more difficult.
• CLOSED: for safer and more stable work on large and heavy logs, optimal for transport and storage.

TECHNICAL FEATURES
The hydraulic system requires a double-acting line.

Safety is ensured by the block and relief valve, which is integrated on all grapple models (except for model 1000R).

Compared to the R-series, the 1400HD, 1600HD and 1800HD grapples feature lateral reinforcements along the claws and a double-box reinforcement structure.

Wood grapple PFIMX is characterised by a lightweight construction for handling wood logs, small or large in diameter, on an excavator, backhoe loader, telescopic handler or tractor.

TECHNICAL FEATURES

FIREWOOD PROCESSOR

admin — Mon, 16 Jun 2025 21:38:51 +0000

Home / Equipment / Wood processing / Firewood processor

FIREWOOD PROCESSOR

to split firewood effortlessly

The TS400 firewood processor is designed to section and split firewood for a fireplace or stove, effortlessly and in absolute comfort.
It performs all work from loading to splitting in complete autonomy on excavator, skid steer loader and tractor.

Each work step is controlled via the supplied 12 V radio remote control and can be operated without ever leaving the cab of your operating vehicle.

The ease of work, and its speed , makes it possible to split quintals of wood without any effort or fatigue.

TECHNICAL FEATURES
The work phase of the equipment is divided into 3 stages:

loading the trunk up to 3 m in length, either by bending the excavator boom or by tilting the front pistons,

2. log section, adjustable in 20 or 60 cm length, which is done by sliding the carriage and cutting the chainsaw bar;

3. final splitting adjustable in 2 or 4 pieces, of the previously sectioned stump.

The hydraulic system requires a single-acting line with drainage.

Each work step is controlled via the supplied 12 V radio remote control and can be operated without ever leaving the cab of your operating vehicle.
The ease of work, and its speed , makes it possible to split quintals of wood without any effort or fatigue.

TECHNICAL FEATURES

LOG SPLITTER

admin — Sun, 15 Jun 2025 21:38:12 +0000

Home / Equipment / Wood processing / Log splitter

LOG SPLITTER

for splitting and handling logs

Log splitter SPT is designed to split and handle logs of any length and type, up to 600 mm in diameter.
The equipment can be installed on most operating machines such as: excavator, skid steer loader, backhoe loader or telescopic handler.

The log splitter is equipped with extractors to facilitate the forks’ exit from the log at the end of splitting operations. The log-splitting forks are available with wear-resistant replacement steel blades.

TECHNICAL FEATURES

In order to simplify work, both in the positioning and log handling phases, different types of rotors are also available: both fixed and 360-degree oscillating.

TECHNICAL FEATURES

FELLER BUNCHER

admin — Sun, 15 Jun 2025 14:07:16 +0000

Home / Equipment / Tree cutting / Feller buncher

FELLER BUNCHER

for felling and moving logs up to 650 mm quickly

The GSA feller buncher is the ideal equipment for felling trees during complex, large-scale operations, where trees need to be felled and processed very quickly.
Available on excavators and telescopic handlers in 2 models for cutting from 250 to 650 mm diameter.

TECHNICAL FEATURES
The felling of the plant is done directly from the header, which, after the cutting operation, immediately places the trunk in a horizontal position.

The structure is made of wear-resistant steel and driven by a hydraulic motor.

The hydraulic system requires two double-acting hydraulic lines as well as 1 free-flow return to tank.

The cutting system features a hydraulic chainsaw unit with rapid mechanical chain tensioner and automatic lubrication of the saw bar

Safety is guaranteed by the lock valve on the hydraulic cylinder, which ensures that the grapple remains closed even in the absence of hydraulic pressure.

The GSA feller buncher is the ideal equipment for felling trees during complex, large-scale operations, where trees need to be felled and processed very quickly.

Available on excavators and telescopic handlers in 2 models for cutting from 250 to 650 mm diameter.

The felling of the plant is done directly from the header, which, after the cutting operation, immediately places the trunk in a horizontal position.

TECHNICAL FEATURES

LOG GRAPPLE

admin — Sun, 15 Jun 2025 08:31:42 +0000

Home / Equipment / Log grapple / Log grapple HD

LOG GRAPPLE HD

with robust structure and open or closed tips

OMEF’s log grapple HD has an extremely robust and durable double cylinder design for sorting and moving logs and timber of all sizes on an excavator, backhoe loader, telescopic handler or tractor.

The grapple is available with two different types of tips:
• OPEN: for greater versatility and manoeuvrability on varied and uneven timber or in tight, confined spaces where gripping is more difficult.
• CLOSED: for safer and more stable work on large and heavy logs, optimal for transport and storage.
TECHNICAL FEATURES
The grapple features significantly reinforced profiles and a larger rotating plate, and is also prepared for application on chainsaw units.

The hydraulic system requires a double-acting hydraulic line.

Safety is ensured by the block and relief valve, which is integrated on all grapple models.
The machine can be equipped, to improve speed and ease of work, with either the oscillating rotator or the fixed rotator.

TECHNICAL FEATURES

STUMP SHEAR

admin — Fri, 13 Jun 2025 21:39:24 +0000

Home / Equipment / Wood processing / Stump shear

STUMP SHEAR

for removing, chopping and handling wood logs

The OMEF stump shear, model ST, is a robust piece of equipment designed for uprooting stumps in land reclamation processes, for biomass production and for the preparation of new plantations.
Available in 2 models, it can be installed on excavators or telescopic handlers.

The special design of the structure and blade is designed to ensure gentle removal of the roots from the soil, without leaving excessive unevenness, and promotes effective shredding of even the most fibrous stumps.

The large opening of up to 1.5 metres makes it easier to grip even the most stubborn stumps to be uprooted and to transport the material to the shredding machines.

TECHNICAL FEATURES
The hydraulic system requires only one double-acting line.

The large opening of up to 1.5 metres makes it easier to grip even the most stubborn stumps to be uprooted and to transport the material to the shredding machines.

TECHNICAL FEATURES

STUMP GRINDER FOR EXCAVATOR

admin — Wed, 11 Jun 2025 21:40:16 +0000

Home / Equipment / Wood processing / Stump grinder for excavator

STUMP GRINDER FOR EXCAVATOR

to grind wood stumps of all sizes

The FRS stump grinders for excavators are particularly useful along roads or in parks, where trees have been cut down and precise removal of the remaining stump is required.

Two different models are available, suitable for grinding stumps of varying sizes.

The machines, which can only be installed on excavators, are equipped with a disc rotor with interchangeable tines arranged in a V-shape. The tines shred even the most fibrous stump until it is completely removed.

The remaining residues of the ground stump, mixing with the surrounding soil, provide fertilising material for the surrounding soil.

TECHNICAL FEATURES
Safety during shredding is ensured by the protective casing and mechanically adjustable chains.
The hydraulic system requires only one hammer line with drainage pipe.

The FRS stump grinders for excavators are particularly useful along roads or in parks, where trees have been cut down and precise removal of the remaining stump is required.

Two different models are available, suitable for grinding stumps of varying sizes.

The remaining residues of the ground stump, mixing with the surrounding soil, provide fertilising material for the surrounding soil.

TECHNICAL FEATURES