Home / Equipment / Tree cutting / Grapple saw / Grapple saw GS400
GRAPPLE SAW GS250
to cut up to 250 mm in diameter
The smallest grapple saw in the range, for felling, pruning and handling logs and plants on excavators.
The GS250 grapple saw is designed for felling, pruning trees and handling logs up to 250 millimetres in diameter.
TECHNICAL FEATURES
Cutting the plant is managed by the chainsaw kit with automatic lubrification of the saw bar, and facilitated by the 360° rotation of the dlewing ring.
Safety is ensured by the double grapple, the lock valve on the safety hydraulic cylinder and supported by the toothed upper holder.
The hydraulic system requires two double-acting hydraulic lines: one dedicated to the 360° rotation and one dedicated to the grapple and saw bar functions, with function selection managed by a solenoid valve.
A new single-hydraulic-line configuration is also available, allowing the grapple saw to be used on a wider range of excavator models.
Also available with our turnkey kit, consisting of:
- mounting bracket, specific to your operating vehicle;
- dedicated hose kit.
This way you can quickly install your equipment and start working, without worrying about the rest.
The smallest grapple saw in the range, for felling, pruning and handling logs and plants on excavators.
The GS250 grapple saw is designed for felling, pruning trees and handling logs up to 250 millimetres in diameter.
TECHNICAL FEATURES
Cutting the plant is managed by the chainsaw kit with automatic lubrification of the saw bar, and facilitated by the 360° rotation of the dlewing ring.
Safety is ensured by the double grapple, the lock valve on the safety hydraulic cylinder and supported by the toothed upper holder.
The hydraulic system requires two double-acting hydraulic lines: one dedicated to the 360° rotation and one dedicated to the grapple and saw bar functions, with function selection managed by a solenoid valve.
A new single-hydraulic-line configuration is also available, allowing the grapple saw to be used on a wider range of excavator models.
Also available with our turnkey kit, consisting of:
- mounting bracket, specific to your operating vehicle;
- dedicated hose kit.
This way you can quickly install your equipment and start working, without worrying about the rest.
SEE TECHNICAL SPECIFICATIONS
Carico massimo
Maximum load
Charge maximale
Apertura massima
Maximum opening
Overture maximale
Catena
Saw chain
Chaîne de tronçonneuse
GS250
3 – 6 tons
230 Kg
510 lbs
250 mm
9,9″
400 kg
880 lbs
430 mm
16,9″
200 – 250 bar
2900 – 3625 psi
15 – 50 l/min
4 – 13 gpm
.404″
1,6mm
400 mm
15,8″
Motore a pistoni “Parker” 11 cc
“Parker” piston motor 11 cc
360°
WATCH GRAPPLE SAW GS250 AT WORK
DISCOVER GRAPPLE SAW
GS250
GS400
GS600
